ColorFabb NGEN 1.75mmCF-NGEN-175
Create excellent looking prints!
Supplied in a 750 gram filament spool size. nGen is made with Amphora AM3300, which makes nGen more work with a larger temperature variety, producing reliable results and resulting in less waste. nGen exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering large panel of users to create durable and useful items. It promotes good flow properties through the printer nozzle even at lower temperatures.
Eastman Amphora 3D™ Polymer allows the user to produce 3D printed functional products in a safe way. It’s a low-odor, styrene-free choice that is uniquely suited for 3D printing applications. Using Amphora your printed parts will be more functional, durable and efficient.
Tips and Tricks for Printing
|Diameter Tolerance||± 0.05 mm|
|Density||1.35 – 1.37 g/cm3|
|Glass Transition Temperature||85C|
|Spool Size||750 grams of filament|
Store filament away from the sun and in a sealed plastic bag with the silicon moisture bag inside.
Price inclusive of GST.
Please note these products will be shipped separately from X3D products and other brands of filament. They will be shipped the following day from order*
Hard to finetune filament, but nice colour
Product: ColorFabb NGEN 1.75mm
I found this filament very hard to finetune, I just used more than half of the spool for testing purposes and did not find the optimal settings yet,
Although it's getting better. It's brittle when printed too cold or using too much cooling fan. The material is very runny at higher temperatures so you have to find an optimum between brittle when printing at lower temperature and more breaking-resist when printing at higher temperatures, but then you'll get stringing and oozing issues.
I like the dark grey colour and it should be more temperature resistant than PLA. The communication of the shop was great.
Printed with a Sunhokey Prusa I4 (finetuned and modded) 0.4mm nozzle and 0.2mm layers. Best settings so far using Simplify 3D:
230 degrees, 80 degrees bed, fan 50%
First layer: 75% height, 100% width and 50% speed
First 3 layers 240 degrees and 0% fan.
Use 100% fan at bridging, 30% speed and 110% extrusion multiplier
Extra restart -0.20mm
Retraction speed 60mm/s
Print speed 50mm/s, outer perimeter 25mm/s
4 top, bottom and wall perimeters
Dennis - Nov 2018