X3D Polycarbonate Sample

  • product image 1
  • product image 2
  • product image 3
  • product image 4
  • product image 5

Pricing by Quantity

1 2
4.00 3.00

Minimum order 1


Stock available

1.75mm 910
3.00mm out of stock

When you need it to be strong

X3D Pro Polycarbonate filament is a strong thermoplastic material which is much stronger than PLA or ABS.It is a really strong material while still maintaining temperature resistance. Polycarbonate does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.

Extruded Polycarbonate filament cools down quickly which can lead to warping. However X3D Pro Polycarbonate prints at 230 – 270 degrees so warping is reduced.

Print Settings

Extruding temperature for Polycarbonate filament is generally around 230-270°C. Polycarbonate filament slowly softens when heated. Slower print speeds are preferred as an increase in temperature is required for faster prints. Buildtak should be used on a heated bed, at around 120°C.